![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
PORSCHE 924 GT CHANGECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 - Fuel/Exhaust (includes uncategorized and accessory items) ![]() 911606105DXATK The warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary between 6-8 weeks. Sold individually. 1 necessary per car.
$744.70
Make a selection 9966310639A All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$225.50
Make a selection 91121152200 Engine compartment blower to rt. Heat exchanger; 60mm x 1100 mm. Not for ca models; original tan paper/aluminum
$20.09
Make a selection 914VWCOLL This is a very correct limited edition factory model from vw. it is not available in the united states and very hard to find. we have a stash of them coming and because of the exchange rate and shipping and duties, they will be $75 each. we are getting the last 20. anyone interested can put their order in and we will ship when they arrive. after the 20 are sold we will cut off the orders. Do not miss this once in a lifetime opportunity to own one of these commemorative models. General FitmentACCESSORY914 1970-76
$75.95
Make a selection 91135204108EQ If you are experiencing a pulsation and hearing grinding sounds when braking, odds are your rotors need to be replaced to restore full stopping power. This rotor is an OEM replacement (replacement for original #911 352 041 08), manufactured by zimmermann in Germany. It is internally vented and z-coated for corrosion resistance. Features: anti corrosion "z-coating" prevents rust. Simple bolt on, modifications are not necessary. Made in Germany. Sold individually. 2 necessary per car. Left or right-side fitment. Please note: rotors should always be changed in pairs. Please check the model fitment tab to ensure accurate fitment.
$166.10
Make a selection 91134101310ATK The reconditioning process includes full inspection of the cross member to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we seal it with a corrosion resistant plating. Send us your cross member and we will have it reconditioned for you. We do not offer a core exchange on this part. If your original part is defective and cannot be salvaged, we will notify you and make arrangements for its return. Sold individually. 1 necessary per car.
$224.40
Make a selection 1159029964WD The ohlins road & track suspension gives our customers a true racing experience, with their own cars, without losing comfort when commuting to work. Our unique dual flow valve (dfv) technology allows you to quickly change the stiffness of the shock absorber. When arriving to the racetrack, just turn the golden knob clockwise on the damper to set it in race mode this action changes all four areas in the damper; low and high speed compression and rebound damping. With ohlins road & track coil overs you will experience a car with blistering response times, improved bump absorption and a massive amount of grip to increase the safety when driving your car on the limit. The car will be easier to balance on the edge o...(choose a part on the right to read more)
$5,635.30
Make a selection 0760310874 This book is a must for anyone thinking about rebuilding their own 911's engine. Never-before published information details the nuances of tackling this daunting task! From dropping the engine, to reconditioning and blueprinting, through final reinstallation and break-in, dempsey guides you step-by-step through the pitfalls often experienced by even the best mechanics. Contains reliable information on parts interchange, performance modifications, reliability upgrades, tear down, and potential problems encountered along the way. Essential information for do-it-yourselfers and for those looking to hire a professional. This book provides excellent insight and information into the inner workings of the air-cooled ...(choose a part on the right to read more) General FitmentACCESSORY
$34.50
Make a selection 00004490042 Cabriolets are not known for having great acoustics inside the passenger compartment. However, the new Porsche Boxster high performance audio system changes all that. Explicitly designed for the interior and layout of the Boxster, the system delivers outstanding performance with either the roof on or off. The specially designed amplifier delivers two channels of 160 watts each, powering 2 ohm speaker sets. Two high-quality mid-range/tweeter systems coupled with a dual bass system in the door deliver incredible sound while being elegantly integrated within the Boxster's interior. Installation requires some knowledge of stereo installation, but in general is not too complicated. Beethoven or boston, the music wi...(choose a part on the right to read more)
$4,214.03
Make a selection 220110901ATK Sport throttle bodies are a great addition for those with highly modified cars. They are a great addition for those with full exhaust systems (larger diameters), maf kits, larger displacements, street or race cams, etc. The remanufacturing process includes full inspection of your throttle body to ensure proper operation after the remanufacturing process. We then disassemble and bore the original to a 2.8-inch (71 mm) diameter. The entire throttle body is cleaned, degreased and the internals are polished to create more laminar flow. We then machine the shaft to accept larger butterfly's which seamlessly match the bore. All clearances are checked for precision to ensure reliability. Each throttle body is remanuf...(choose a part on the right to read more)
$485.10
Make a selection 99710090391 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$861.30
Make a selection 997352108A1 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$1,300.20
Make a selection 99750598390 This is a genuine 997.1 GT3 Porsche motorsports cup spoiler lip. It is a cost-effective replacement for the original GT3 spoilers. It also improves front end downforce. Please be aware that it is lower than the original Porsche spoiler but is far more pliable and more curb friendly. This part is shipped in a smaller box by motorsports to conserve on shipping costs. It is manufactured in polyurethane, so it has memory. Once you receive it just lay it out in the sun for an few hours or slowly and carefully warm it up with a heat gun. Please note: all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangea...(choose a part on the right to read more)
$239.95
Make a selection 99663114380 Please note: this is for cup / r models up to 2001. They have the cut out for the clear headlight corner trim. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$335.50
Make a selection 90110705903 The new oil cooler for the Porsche 914-6 is based on the incredibly popular and successful csf 911/930 turbo engine oil cooler (csf #8242). Both of these oil coolers went through 2+ years of development and multiple rounds of prototypes. The csf Porsche 914-6 engine oil cooler’s world debut at rennsport reunion 2023 was met with incredible support and enthusiasm from the community. Obviously air-cooled enthusiasts know the struggles associated with the oil cooler located on the engine block of the old flat six motor. With the 914-6 swaps/conversions becoming ever more popular, this new oil cooler will be a game changer for classic Porsche owners and restoration shops.
From $1,030.00
Make a selection 11534399300600R If you are looking for added damping performance on the street, the bilstein b6 is the ideal solution. If you are running lowering springs, mo30 or mo33 springs, or stiffer springs we suggest the bilstein b8 shocks. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually.
$526.90
Make a selection 115343993008L If you are looking for a shock to combine with lowering springs or firmer springs the bilstein b8 is the ideal solution. These offer more performance than the b6 as the valving is more firm. These will pair well with h&r or eibach lowering springs, however you can also run them with euro mo30 (row) springs and mo33 springs. The product benefits at a glance: shortened high-performance shock absorbers for virtually every lowering spring set. Marked improvement in safety and sportiness with additional spring changes (lowering). Sporty feel, yet still comfortable. Offers precise handling and optimum control. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested an...(choose a part on the right to read more)
$532.40
Make a selection 11533399300600 If you are looking for added damping performance on the street, the bilstein b6 is the ideal solution. If you are running lowering springs, mo30 or mo33 springs, or stiffer springs we suggest the bilstein b8 shocks. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Left or right side fitment. Sold individually. Please note: we do not recommend using the b6 with the ...(choose a part on the right to read more)
$396.00
Make a selection 115384 If you are looking for added damping performance on the street, the bilstein b6 performance damper is the ideal solution. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually. 1 necessary per car. We recommend adding our lowering spring collars if you would like a lower ride height, our part # 115110016
$640.20
Make a selection 115385 If you are looking for added damping performance on the street, the bilstein b6 performance damper is the ideal solution. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually. 1 necessary per car. We recommend adding our lowering spring collars if you would like a lower ride height, our part # 115110016
$640.20
Make a selection 220110903ATK More air = more performance * please note: FVD can either charge a core charge or exchange your throttle body.
$485.10
Make a selection 220110905ATK 76,4mm ! More air = more performance supplied with an exchange throttle body. Not for e-gas models 76.4 mm diameter throttle body (1.8 mm larger than stock)
$485.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |