PORSCHE 997 ORDER FORMCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 - Brakes/Wheels (includes uncategorized and accessory items) 150PB100916 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$47.52
Make a selection 150BA7902 This bursch racing catalytic converter replacement pipe reduces engine damaging heat at the track and increases performance in the mid-range and top end. Like all bursch products, this replacement pipe is coated in high temp. Paint (1,200 degree). Use of this product for purposes other than solely for competition and off-road use is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. This product is intended for racing and off-road vehicles which may never be used on a public road
$100.98
Make a selection 115900997BIT021 The pss 10 suspension kit provides the ultimate in performance tuning. The fully adjustable monotube gas shock absorbers offer a selection of nine precise compression and rebound settings. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Handling and control are just a few twists away. Regardless of whether in daily motoring, on the nordschleife of the nurburgring at the weekend, in training courses or in club sports - it's all pure driving enjoyment! Product advantages at a glance: • bilstein mono-tube/inverted technology • bilstein road tested and tuned • high driving dynamics with g...(choose a part on the right to read more)
$4,692.60
Make a selection 150PB100918 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$47.52
Make a selection 150PB100915 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$47.52
Make a selection 115900997BI01 Bilstein b16 damptronic not only engine performance but, above all, suspension technology contributes to the fascination of a Porsche sports car. Bilstein offers an range of active coil over systems of the current Porsche models with pasm. The coil over system is electronically adjustable. So pasm-function and car sensors like psm stays fully in function. In addition the height-adjustment offers a certified range of lowering. Discreet sporty looks and precisely defined response within both setup modes, accompanied by high driving dynamics and excellent residual ride comfort. Regardless of whether in daily motoring, on the nordschleife of the nurburgring at the weekend, in training courses or in club sports - it...(choose a part on the right to read more)
$5,040.68
Make a selection 170211025SS This is a high-quality replacement for original number, 930 211 025 01 manufactured by dansk. It is manufactured in stainless steel. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911102 sold individually. Right or left side fitment. 2 necessary per car. Please note: this will not fit u.s. 3.0 l SC models from 1980-83. We suggest our part # 100 2...(choose a part on the right to read more)
$1,178.50
Make a selection 170211014 This steel heat control box is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For proper installation, we recommend a new exhaust gasket, part # 91121129700 clamp, part # 90121105222 and connecting piece, part # 91165911900 sold individually. 1 necessary per car.
$160.38
Make a selection 150PB1027 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's 911 models from 1978-89 if fitted with an 18mm original rear sway bar.
$53.46
Make a selection 150SPB976 Replace worn-out spring plate bushings with these longer lasting poly-graphite plastic bushings. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. This includes the inner and outer bushing for the 2-piece adjustable spring plate. Sold individually. 2 necessary per car.
$42.77
Make a selection 17021102501 This is a high-quality replacement for original number, 930 211 025 01 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911102 sold individually. Right or left side fitment. 2 necessary per car. Please note: this will not fit u.s. 3.0 l SC mode...(choose a part on the right to read more)
$693.79
Make a selection 150PB10134 Replace worn-out original sway bar drop link bushings with this longer lasting poly-graphite plastic bushing set. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. The set includes 4 complete bushings and 4 sleeves (8mm inner diameter). Sold as a set. 1 necessary per car.
$79.60
Make a selection 170211021 This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side is our part # 170211022
$1,179.68
Make a selection 170211021MEC This is a high-quality replacement for original number, 911 211 021 14 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911101 sold individually. 1 necessary per car. Please note: the corresponding right side is our part # 170211022
$1,443.42
Make a selection 210111011D1 Improve sound and performance by decreasing exhaust backpressure with this catalytic bypass pipe. This is a painted steel bypass pipe, manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. - + 10 crank hp. - lower, deeper, more exotic exhaust note. - steel coated with high temperature paint. - made in europe by dansk. - reduces back pressure and thermal load on the engine. - includes o2 sensor bung....(choose a part on the right to read more)
$331.45
Make a selection 220110903ATK More air = more performance * please note: FVD can either charge a core charge or exchange your throttle body.
$523.91
Make a selection 220110981001 FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. But in order to capitalize on all the performance gains the ipd competition plenum can deliver, you must strike a balance with exhaust components and software. You cannot simply add the ipd competition plenum on the 981 series and expect large gains. But, no need to worry, the FVD ...(choose a part on the right to read more)
$1,597.86
Make a selection 220110908ATK 63,24mm ! (original 60mm) more air = more performance we will need for this rebuild your own part first to work on that. Please contact us before shipping for the rma number.
$523.91
Make a selection 240981351GV Pagid yellow rsl29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a g...(choose a part on the right to read more)
$683.10
Make a selection 22011099706 The 997 turbo ipd "y" pipe was built for the more demanding turbo performance customer. The factory y pipe becomes restrictive when adding substantial power gains. The ipd "y" pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory y pipe delivering the additional power needed to raise the performance bar on any turbo. The ipd "y" y pipe is designed to be a direct replacement of the factory OEM y pipe. There are no modifications or fabrication required for installing the ipd y pipe. This is an easy and straight forward r & r (remove and reinstall) bolt on upgrade. Note: contains everything nec...(choose a part on the right to read more)
$1,182.06
Make a selection 24091135201BH Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Yellow: the suc...(choose a part on the right to read more)
$323.14
Make a selection 240964351GV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. General Fitment911 1994-98968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $392.67
Make a selection 240964351SV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. General Fitment911 1994-98968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $302.23
Make a selection 240965351SV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: • 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. • 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. • 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in perio...(choose a part on the right to read more) General Fitment911 GT3 2003-05911 1994-98 911 1989-94 928 1992-95
From $343.44
Make a selection 24135196501YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more) General Fitment911 GT3 2003-05911 1994-98 911 1989-94 928 1992-95
From $323.14
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |