Vehicles
Sections
151 not categorized PORSCHE 944 S2 AS LINECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1989-94 (includes uncategorized and accessory items) FVD211328ANB
$469.26
Make a selection FVD362965005 For a uniform appearance we recommend replacing all 40 nuts. There are 10 per wheel for a total of 40. Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$4.75
Make a selection FVD3629650061 For a uniform appearance we recommend replacing all 40 nuts. There are 10 per wheel for a total of 40. Sold individually. Please note: tightening torque is 22-23 nm.
$5.94
Make a selection F05P If you haven’t already replaced those rotted or cracked floorboards in your 911, you need to. Don’t waste your money on another set of wood floorboards that will just rot like your old ones, or plastic ones that will crack with time. Rennline now offers aircraft grade aluminum floor boards that will last forever. These floorboards are very light weight and install in minutes. They’re exact replicas of the original floorboards without the need to ever replace them. Silver in color. General Fitment911 1989-94911 1994-98
$145.80
Make a selection M0507B Removing the blower motor assembly from your 1989-98 964/993 is a very standard modification for cars that want to loose a few pounds. This modification reduces your cars weight by about 10 pounds and really cleans up the engine bay. This kit is an exact replica as used by Porsche motorsports for the factory lightweight 964 cup and 964 rsr race cars. Manufactured from aluminum and is available in red and black powder coat or clear anodized. Comes with all the stainless steel hardware required for a 20 minute installation. Will not work on turbo cars. Black in color. General Fitment911 1989-94911 1994-98
$124.74
Make a selection FVDB7035500 FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved by conforming to the fmvss 1...(choose a part on the right to read more)
$182.95
Make a selection GOOD37024 All brake lines, installation hardware, and instructions are included. Stainless steel brake lines do several things to improve your stopping distance: they prevent heat build up, they prevent condensation, they eliminate the possibility of hose cracking or busting, and they allow maximum flow of pressure to the brake calipers when the brake pedal is depressed. General Fitment911 1989-94
$184.97
Make a selection FVDB6535594 FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved by conforming to the fmvss 1...(choose a part on the right to read more) General Fitment911 1989-94
From $171.07
Make a selection I203 Radio and heater control block off plates - until now, removing the center console from your 964/993 was not possible due to the required switches that were mounted in it. Rennline's new radio and heater control block off plates solve that problem. These plates have been specially designed to accept the factory switches installed in the center console of all 964/993 cars. Don't have the factory switches? No problem. These plates are also available without switch cutouts so you can install your own switches or gauges. Made from powder coated metal and installs in minutes on cars with the radio or heater controls removed. General Fitment911 1989-94911 1994-98
$54.00
Make a selection I21 Radio block off plates - until now, removing the center console from your 964/993 was not possible due to the required switches that were mounted in it. Rennline's new radio and heater control block off plates solve that problem. These plates are also available without switch cutouts so you can install your own switches or gauges. Made from powder coated metal and installs in minutes on cars with the radio or heater controls removed. General Fitment911 1984-86911 1987-89 911 1989-94 911 1994-98
$64.80
Make a selection M04 One of the only weak points on the 964 and 993 chassis is the engine carrier. When these models are tracked, or are fitted with stiffer than stock engine mounts, the engine carrier should be reinforced. If it is not, the carrier is known to bend, crack, or even break cleanly away from an engine mount in response to increased vibration and stress. The Porsche factory was aware of this problem and equipped its race cars with a reinforced engine carrier. Rennline now exclusively offers an engine mount reinforcement gusset kit that can be welded to the engine carrier by your shop. General Fitment911 1989-94911 1994-98
$165.13
Make a selection I200 Heater control block off plates - until now, removing the center console from your 964/993 was not possible due to the required switches that were mounted in it. Rennline's new radio and heater control block off plates solve that problem. These plates have been specially designed to accept the factory switches installed in the center console of all 964/993 cars. Don't have the factory switches? No problem. These plates are also available without switch cutouts so you can install your own switches or gauges. Made from powder coated metal and installs in minutes on cars with the radio or heater controls removed. General Fitment911 1989-94911 1994-98
$54.00
Make a selection M091 Rennline's blower motor bypass pipe is a carbon fiber replica of the factory installed unit found on the lightweight 3.6 rs race cars. This pipe allows you to save 9 pounds from the removal of the factory blower motor assembly, but still have a functioning heater system in your car. Manufactured from ultra strong, lightweight carbon fiber and comes equipped with the aluminum fitting for the distributor breather tube. Custom insignias are available upon request (insignia size limited) call for details. Fits 964 89-98 except 95's 993's require the 964 fan shroud part # g96410640302. General Fitment911 1989-94911 1994-98
$322.92
Make a selection M08 Rennline billet aluminum solid engine mount Porsche 997 05+ General Fitment911 1989-94911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
From $331.45
Make a selection M18MOUNT The rennline tunable engine mount for the Porsche 964 offers the ultimate in adjustability for your car. Replacing your compliant factory mounts will decrease engine movement resulting in better acceleration, handling and significantly increased shifter feel. This is the ultimate solution for almost any car, and allows you to tune our mounts for the way you drive.these mounts are cnc machined from billet aluminum and include three pairs of inserts in varying densities. Tune your mounts by using the softer inserts to reduce engine slop and avoid missed shifts in your street car, or utilize the stiffest inserts to get the most from a more focused track car. You can even mix and match, giving you 9 possible combin...(choose a part on the right to read more) General Fitment911 1989-94BOXSTER 1997-04 BOXSTER 2005-08 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12
$510.30
Make a selection
$142.56
Make a selection NLA18003052 5mm id- sold by the meter safe for up to e10 ethanol supplemented fuels replaces 64418003052
$7.19
Make a selection FVD219501039 This extension is needed when updating to hydraulic tensioners, part # FVD105911s sold individually. 1 necessary per car.
$95.04
Make a selection
$7.59
Make a selection
$6.48
Make a selection
$128.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |