Vehicles
Sections
440 not categorized PORSCHE 964 AM FMCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1989-94 (includes uncategorized and accessory items) FVD333505007
$54.75
Make a selection FVD33396401 A cost-effective combination of bilstein b6 shocks with a set of German h&r lowering springs. This kit is a perfect balance of performance and comfort for street use. Benefits: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Slightly lower stance at 1.3 inches (35 mm) front / 1.18 inches (30 mm) rear. Marked improvement in safety and sportiness. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Please note: if you would like to reduce the ride height, please order part # 115110016 which will lower the stance by another 1.5 inches (40mm).
$2,741.61
Make a selection FVD33396411 A cost effective FVD exclusive combination of bilstein clubsport shocks with a set of eibach pro kit springs. This suspension kit is meant for those who want the car to sit at the lowest possible ride height. This set up will allow you to lower the front axle by 2.4 inches (60 mm). This is a perfect kit for clubsport or race use where the surfaces are smooth and even. The stock rs ride height was 1.6 inches (40 mm) lower. So, this is a full 3/4 of an inch (20 mm) lower on the front axle. Sold as a complete kit. 1 kit is necessary per car. Please note: we recommend the b6 / ohlins suspension kits for those looking for more comfort for street use.
$2,825.45
Make a selection FVD34101807AT By ordering this part number you get after previous sending in General Fitment911 1989-94
$497.98
Make a selection FVD341999R Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with our FVD clubsport series. They are made from rubber with a 85 shore hardness value which is the same as the rennsport models. 85 shore is more durable, provides more positive suspension location and is quiet and more forgiving than a monoball upgrade. This is the ideal upgrade for street and light track / clubsport use. This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes 85 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.
$134.24
Make a selection FVD34310002R FVD-alu-camberplates replace soft top strut rubber bushings. The FVD-camberplates are machined from billeted aluminum, providing you with a wide range of camber possibilities. You can get up to 4 degrees negative camber. FVD-alu-camberplates fits on original-shocks and cup-shocks. General Fitment911 1989-94
$515.21
Make a selection FVD3439641PSS9 The FVD camber plate kit replaces the front and rear original rubber top strut mount bushings. We manufacture each camber plate and mount in Germany and machine each from a solid block of billet aluminum. Each is fitted with spherical bearings which allows a wide range of camber possibilities. This kit contains: 2 front camber plates 2 rear camber plates please note: this kit only works in conjunction with a pss9 / pss10 coil over (double spring) suspension in front and rear. General Fitment911 1989-94
From $1,344.82
Make a selection FVDBSK352964001 Brake service kit contains: - brakediscs - brake-pads - warning contact's - damping plates
$432.43
Make a selection FVD35133ABE The zimmermann sport brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 2 rotors would be needed for the front axle. Left or right side fitment. Please note: these will also fit the 964 jubi (anniversary) European model. General Fitment911 1989-94
From $204.34
Make a selection FVD351964499ST This adapter is needed to mount the big red caliper from the 965 or 993 turbo to a 964 c2 / c4 or 968 cs. Complete with 10.9 grade m12x30x1.5 mm mounting bolts. Made of high strength steel for extreme loads. Sold individually. 2 necessary per axle. Please note: for motorsport use only! General Fitment968 1992-95911 1989-94
From $153.25
Make a selection FVD3522945964R
$4,055.83
Make a selection FVD35247 Sporting look. Better cooling. Removes wetness and contamination fast General Fitment911 1989-94
$461.84
Make a selection FVD362041002 High quality wheel nut and lock set. The set includes a key and teflon insert for your lug tool so the nuts will not be marred when removed. Please check the exact model designation for this part below. Sold as a set. 1 necessary per car.
$38.02
Make a selection FVD375003S Are you experiencing vibrations in the cabin? The most likely cause is a worn transmission mount. Severely worn mounts translate to engine component wear and can even cause difficulty shifting. We can offer your c4 a more sporty feel without the harsh vibration from a solid mount. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). The rs spec shore rubber offers the c4 sportier handling without being too stiff for street use. Be sure to swap yours out during the next service. Sold individually. Central fitment into the transmission carrier bracket 96437502301. 1 qty. Required. Tech tip: now is the ti...(choose a part on the right to read more)
$190.08
Make a selection FVD37505504
$106.92
Make a selection FVD424550KEV High quality polished carbon emergency brake handle. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. General Fitment911 1994-98911 1989-94
From $327.81
Make a selection FVD50055900 Improves aerodynamic efficiency and reduces the wind noise that the a-pillar gutters make at higher speeds. Comes with everything needed to make installation simple. General Fitment911 1994-98911 1989-94 911 1970-73
From $298.19
Make a selection FVD500964RSRGT Motorsport quality grp (glass-reinforced plastic) complete body kit. Includes rsr (adac GT class) specifications complete body kit with front bumper (with retractable spoiler lip), front and rear fender flares, side skirts and the matching rear bumper. Features: - produced by a German motorsport manufacturer. - strength testing is available - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: please provide us with the year / model. These are motorsport quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely p...(choose a part on the right to read more) General Fitment911 1989-94
$10,149.08
Make a selection FVD50501500
General Fitment911 1989-94
$161.18
Make a selection FVD505123964RS Rear bumper center section race look for Porsche 964/965 turbo General Fitment911 1989-94
From $430.92
Make a selection FVD512964008RS Made in europe by one of the manufacturers to Porsche. Extremely high-quality glass fiber komposite (gfk) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight - glass fiber komposite (gfk) - mounting is just like factory, no modifications are necessary. - fits all 964 narrow body models - left and right side exits for exhaust please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. If you do not have the rs license plate light please also order 91163162004 General Fitment911 1989-94
From $1,410.88
Make a selection FVD538001 Genuine Porsche illuminated key head with key blank. Sold individually.
$120.81
Make a selection FVD545964000 This rear window is a high-quality lightweight replacement that is designed to perform like the original. It is a replacement for original number, 964 545 107 04. Features: 10 % lighter than original (weighs approx. 6 kg (13.2 lbs)) uses the original seal, part # 96454522500 clean appearance - does not include a cut out rear windshield wiper does not include a rear window defroster grid (less wiring / weight) green tinted, curved design like the original made in Germany please note: be sure to check the model fitment tab to ensure this works on your car.
$804.28
Make a selection FVD55246500 High quality polished carbon dash trim piece. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon replacement for original # 964 552 465 00 01c. Sold individually.
$143.75
Make a selection FVD55259100 High quality polished carbon dash trim piece. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon replacement for original # 964 552 231 01 01c. Sold individually.
$87.91
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |