![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
PORSCHE 914 TURBO WHEELCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1989-94 - Transmission (includes uncategorized and accessory items) ![]() FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD116905 Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. They offer a silky smooth release, superb drivability, can handle more torque (315 ft/lbs. / 425 nm max.) than comparable stage 1 type recommendations. We specifically chose a clutch disc with torsion springs that function as a vibration damper between engine and gearbox, in order to give you an effortless release in 1st gear. This kit is suited for daily use and offers a superior driving experience. Clutch kit includes everything needed for installation: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Lightweight ...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $2,234.41
Make a selection FVD11610313 Race clutch kit with rigid sinter clutch disk (for cars already equipped with a light flywheel). General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98 911 1989-94
$2,169.16
Make a selection AP9972TT170 The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
$3,937.45
Make a selection BK35153 This 254-page book is packed with information on how to choose, install, tune and maintain performance equipment including turbo, special built race and wish program cars. Porsche expert bruce anderson explains wheel and tire improvement, up-to-the-minute autocross or showroom stock suspension and brake modification, custom add-on body work and paint and interior improvements. Main sections cover history, engine, transmission, chassis and bodywork. General FitmentACCESSORY
$46.08
Make a selection 99704460017 Set of four wheel center caps, highly polished, with monochrome Porsche crest. This wheel center caps set adds a destinctive look, in motion and at rest. Suitable for the 19-inch turbo wheel only. General FitmentACCESSORY
$257.70
Make a selection FVD1161021 The discs rigid hub with organic friction material has superior thermal resistance, is more resistant to higher rpm's than the oe discs, offers greater longevity and is able to transmit higher torque (370 ft/lbs. / 500 nm max.). It is an ideal kit for lightly modified street or light use track cars. Clutch kit is made in Germany and includes: 1 qty. Clutch disc (zf sachs race engineering, gmbh) 1 qty. Pressure plate (zf sachs race engineering, gmbh) 1 qty. Release bearing 1 qty. Spline lubricant 9 qty. Pressure plate screws kit weighs 13 lbs. (6 kg) tech tip: when you are planning to install a new clutch, it is a good idea to replace the clutch release fork and shaft to ensure proper clutch engagement. Our par...(choose a part on the right to read more) General Fitment911 GT3 2007-11911 GT3 2003-05 911 1994-98 911 1989-94
From $1,144.17
Make a selection FVD123014ATK K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)
$2,976.60
Make a selection FVD123048ATK FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)
$2,634.50
Make a selection 930123002X This remanufactured turbo is a direct replacement for original part # 930 123 002 00. The remanufacturing is completed in Germany by kkk/borg warner certified technicians. This ensures reliability, superior performance and cost effectiveness. The remanufacturing process includes: complete disassembly. All parts are cleaned, inspected and measured for tolerances. Turbine wheels are replaced. Thrust bearings are replaced. All new seals are installed. Internals are reconditioned. Parts are balanced (static & dynamic) according to balancing protocol. For a complete installation we recommend adding a gasket, part # 93012319105 an intake sleeve, part # 93011015801 and be sure to have a few spare studs on hand, part #...(choose a part on the right to read more)
From $2,981.74
Make a selection TL1021 This universal flywheel lock has been designed for use on all air-cooled Porsche engines (series 356, 912, 914 & all 911s through 1969) and on all air-cooled volkswagen engines (type 1,2,3 & 4). This tool is a must when changing a flywheel or its seal and it comes in handy when changing a clutch. Made from a forging, this quality tool will last a lifetime. Gpcg91101000. General Fitment914 1970-76356 1950-59 356 1960-65 912 1965-69 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
$12.60
Make a selection MBK29 Italian momo shift knobs are the finest accessories your could add to your Porsche. Made from the finest materials- leather, wood, or metal- these shift knobs add that extra accent and are shaped to be pleasing to the hand as you row through the gears. All knobs are universal designs that fit your Porsche perfectly. Leather and metal. Order the matching nero steering wheel for the full effect (part number rmb3519). General FitmentALL
$136.50
Make a selection MBK35 Italian momo shift knobs are the finest accessories your could add to your Porsche. Made from the finest materials- leather, wood, or metal- these shift knobs add that extra accent and are shaped to be pleasing to the hand as you row through the gears. All knobs are universal designs that fit your Porsche perfectly. Leather with chrome metal. Order the matching GTr 2 steering wheel for the full effect (part number rmb3508). General FitmentALL
$126.00
Make a selection 93010221300 Symptoms of a bad flywheel include slipping, rattling and clunking noises when depressing and releasing the clutch pedal. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Weighs: 5.4 kg (11.9 lbs) sold individually. 1 necessary per car. View/Change Diagram
From $312.44
Make a selection FVD116964993 Weighs 11.24 lbs! General Fitment911 GT3 2007-11911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94
$702.46
Make a selection FVD116907 Quicker acceleration, leight weight. General Fitment911 1989-94
$3,044.13
Make a selection FVD116103 Hailing from the baden wurttemberg region in Germany, speaking the language and dealing with lead engineers from the OEM and motor sport manufacturers for more than 30+ years has many advantages. Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. They offer a silky smooth release, superb drivability, can handle more torque (442 ft/lbs. / 600 nm max.). Than comparable stage 1 type recommendations. These kits are perfect for street and light track use. We specifically chose a clutch disc with torsion springs that function as a vibration damper between engine and gear...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05911 1994-98 911 1989-94
From $1,868.90
Make a selection FVD116102 The discs rigid hub with organic friction material has superior thermal resistance, is more resistant to higher rpm's than the oe discs, offers greater longevity and is able to transmit higher torque (370 ft/lbs. / 500 nm max.). It is an ideal kit for lightly modified street or light use track cars. Clutch kit is made in Germany and includes: 1 qty. Clutch disc (zf sachs race engineering, gmbh) 1 qty. Pressure plate (zf sachs race engineering, gmbh) 1 qty. Release bearing 1 qty. Spline lubricant 9 qty. Pressure plate screws kit weighs 13 lbs. (6 kg) tech tip: when you are planning to install a new clutch, it is a good idea to replace the clutch release fork and shaft to ensure proper clutch engagement. Our par...(choose a part on the right to read more) General Fitment911 GT3 2007-11911 GT3 2003-05 911 1994-98 911 1989-94
From $1,243.90
Make a selection 129T101840S The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$446.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |