Vehicles
Sections
60 not categorized PORSCHE 356B REAR SEALCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1987-89 (includes uncategorized and accessory items) 96454303602 Necessary when replacing your right rear quarter window, as this seal retains the window in the body and prevents moisture from getting in. For 964 coupe models. Sold individually. 1 needed per car. Passenger's side fitment.
From $96.12
Make a selection MB1112 The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$460.03
Make a selection 99911323540 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this only fits the wide body / turbo look 911 with the m491 wide body option. Please check the model fitment tab to ensure accurate fitment. View/Change Diagram
From $17.41
Make a selection
$24.95
Make a selection FVD33150030 This kit is complete and includes a total of 8, 4 smaller and 4 larger for the rear control arms. Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set of 8. 1 kit is necessary per car. Please note: noise may resonate inside the cabin during street use.
$806.65
Make a selection FVD341999R Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with our FVD clubsport series. They are made from rubber with a 85 shore hardness value which is the same as the rennsport models. 85 shore is more durable, provides more positive suspension location and is quiet and more forgiving than a monoball upgrade. This is the ideal upgrade for street and light track / clubsport use. This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes 85 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.
$134.24
Make a selection FVD33150045 Original rubber replacement bushing (65 shore hardness value) for the rear control arms (camber link and caster link). This bushing cartridge is weather sealed and is crafted in high carbon steel and 7075 t6 aircraft aluminum. Sold individually.
$70.09
Make a selection BBI9974010001 Features
$2,046.60
Make a selection 91151212900 This seal is secured to the body above the rear center reflector. It prevents moisture from entering under the rear decklid. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. View/Change Diagram
From $14.04
Make a selection 96410601402EQ This OEM cover sits low nearest the rear bumper. If you are removing the motor for maintenance, be sure to check and replace the engine covers / heat shields as necessary. We recommend purchasing a new seal, part # 96410622301 and plug, part # 96410623701 to complete the installation. Sold individually. 1 necessary per car.
$649.84
Make a selection 93050417001 This genuine one-piece seal is closest to the rear bumper, we recommend replacing this when removing the motor for maintenance. We recommend replacing both the small and large engine seals, the small is part # 91150411502 sold individually. 1 necessary per car. View/Change Diagram
From $242.35
Make a selection 90156490505 Genuine part sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. View/Change Diagram
From $16.69
Make a selection 91150332500 This seal sits on the trailing edge of the front fender at the top just below the windshield. It is also used under the back of the rear quarter panel where it meets the side panel. It is also used on the front bumper. We also recommend purchasing the upper seal, part # 91150332600 high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. View/Change Diagram
From $8.53
Make a selection FVD3419991 This is a cost effective alternative to buying new control arms. Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with new bushings of the same rubber (65 shore hardness value). This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes a 65 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.
$134.24
Make a selection 106084 There are not many warning signs of an impending ims failure short of a “death rattle” that occurs as the bearing fails and comes apart. These kits replace the factory sealed bearing with a new, severe duty custom ceramic hybrid roller ball bearing for reduced friction and superior performance in poorly lubricated operating conditions and replaces the factory ims flange hub, bearing support, and fastener with a stronger, revised billet chromoly assembly. The center bearing support also receives an increase in size and no longer is cut for the o-ring that keep engine oil from leaking out of the engine - we have relocated the o-ring to the ims hub flange for added strength to the center stud & bearing support...(choose a part on the right to read more) General FitmentBOXSTER 2005-08BOXSTER 1997-04 911 1998-05 911 1987-89
$971.99
Make a selection 91150411102 This one-piece seal is closest to the rear bumper, we recommend replacing this when removing the motor for maintenance. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. We recommend replacing both the small and large engine seals, the small is part # 91150411302 sold individually. 1 necessary per car. Please note: this only fits 3.0l 930 turbo models from 1975-77. 930 3.3l models require part # 93050417001 View/Change Diagram
From $48.91
Make a selection 91150411302 This one-piece seal is furthest from the rear bumper, we recommend replacing this when removing the motor for maintenance. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. We recommend replacing both the small and large engine seals, the large is part # 91150411102 sold individually. 1 necessary per car. View/Change Diagram
From $15.12
Make a selection 91154250540 As our classics age, the original gaskets and seals become brittle and will crack. It is essential that they are replaced to prevent moisture damage and to keep interior noise at a minimum. This is an OEM replacement window channel that attaches to the front quarter window. It is also affixed to the window guide rail (rear) on 1987-89 models. All of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. Sold individually. View/Change Diagram
From $15.44
Make a selection 91135290500 High-quality ate, OEM (original equipment manufacturer) replacement caliper seals designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. View/Change Diagram
From $16.18
Make a selection NLA34411 This kit contains all necessary shims, o-rings, spacers, oil seal and instructions for one rear axle. Note: sufficient number of shims are included as well as a correct thickness washer.
From $39.20
Make a selection 93035255302 Rear 8 required per car 4 per caliper View/Change Diagram
From $3.41
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |