Vehicles
Sections
239 not categorized PORSCHE 356 C ALUMINUMCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1978-83 (includes uncategorized and accessory items) FVD35161138 Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. This spacer includes a hub centric design that makes the spacer act as a precise extension of the axle hub for wheel balance. It bolts to the hub by reusing the existing wheel studs, the wheel is then bolted to the spacer studs and affixed with included nuts. Size: 35 mm (1.49 inches) bolt pattern: 5/130 center bore: 71.6 bolt / stud: stud thread type: 14x1.5 material: strength tested alumin...(choose a part on the right to read more)
$187.70
Make a selection FVD36299800 Aluminum center lock dummy with FVD logo that is quality made in Germany. Fits on all wheels that accept the Porsche center cap. Sold individually.
$127.26
Make a selection FVD3522P18056A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,389.66
Make a selection 90121119401 Engine to heat exchanger; 60mm x 380 mm. Original tan paper/aluminum View/Change Diagram
From $9.30
Make a selection 22011098100 FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. But in order to capitalize on all the performance gains the ipd competition plenum can deliver, you must strike a balance with exhaust components and software. You cannot simply add the ipd competition plenum on the 981 series and expect large gains. But, no need to worry, the FVD ...(choose a part on the right to read more)
$1,651.32
Make a selection 91121155300 Hot air hose, engine to heat exchanger, left side (60 x 220 mm, aluminum). View/Change Diagram
From $14.20
Make a selection FVD3522P38056A2 The brembo gran turismo (gt) braking system with type iii rotors is ideal for ideal for clubsport and sprint type track events. It utilizes brembo type iii aggressive face-type discs that offer high initial response with a smooth pedal feel. The type iii offers the highest overall braking confidence and control, allowing a quick qualifying time or top results in sprint races. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with opposed pistons, a complete set of high-performance brake pads, abrasion and corrosion resistant goodridge braided steel brake lines and high-quality fastener hardware...(choose a part on the right to read more)
$4,389.66
Make a selection FVD3522P38056AS The brembo gran turismo s (gt-s) braking system is ideal for clubsport and sprint type track events. The GT-s type iii system utilizes brembo type iii aggressive face type discs that offer high initial response with a smooth pedal feel. The type iii offers the highest overall braking confidence and control, allowing a quick qualifying time or top results in sprint races. Gt-s systems contain advanced calipers that include racing style radiators, dual inner piston seals, an inner pressure seal and an outer wiper seal. This innovative design provides the best combination of performance and long-lasting track use. The calipers are hard anodized in black (machined brembo logo in red) for resistance to corrosion and...(choose a part on the right to read more)
$4,508.46
Make a selection FVD35298001 Brembo direct replacement 2-piece rear rotors for the '04-'06 Porsche Carrera GT designed to be used with the vehicles OEM brake calipers. These include brembo's high thermal type iii rotors , billet aluminum bells, and anti-rattle floating hardware. The floating disc mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly.
$3,059.14
Make a selection 95504400002 Aluminum telescopic-handled ice scraper . This aluminum telescopic-handled scraper features an ice-scraping surface as well as an integrated rubber lip for removing rainwater, etc. General FitmentACCESSORY
$19.43
Make a selection 93033307201 Replace your old drop links to reduce body roll and rejuvenate your cars handling in the corners. We have this manufactured in Germany by an OEM supplier, made from high carbon steel and 7075 t6 aluminum, with precision rod ends. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $42.77
Make a selection 93010396904 The name mahle is synonymous with both Porsche and performance. From the engineering of the world’s first aluminum alloy piston, to the development of the nikasil coated cylinders (nikasil is the wear-resistant cylinder coating now used throughout the industry), the mahle tradition powers not only Porsche street cars, but also today’s most advanced Porsche racecars. If you want more horsepower out of a daily driver, or ultimate performance for a full-on racecar, mahle pistons and cylinders can handle it. These cylinder and piston sets feature nikasiltm coated cylinders which reduce wear and a matched aluminum piston in several different compression rations. Includes rings and wrist pins. View/Change Diagram
From $933.77
Make a selection
$18.76
Make a selection 93010704001 This brand is a very high quality upgrade over the original equipment. Superior fit and finish, machined from aircraft aluminum bar stock in two solid pieces. Each kit contains: (1) collapsible oil tube (4) o-rings (1) snap ring View/Change Diagram
From $49.95
Make a selection BRAID1555RSR New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$885.60
Make a selection 96534703200SP We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM part number, 965 347 032 00. Sold individually. 2 needed per car. We also suggest replacing your inner tie rod, we have a uniball option, our part # 96434705805sp (qty. 1 is needed) and now is also a good time to replace your worn out inner tie...(choose a part on the right to read more)
$272.05
Make a selection BRAID159CUPS This size was specifically developed to offer 944 cup racers exactly the wheel they are looking for! General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$3,180.60
Make a selection 915454 Brembo® GT brake systems were designed with one goal in mind, to maximize braking performance. These performance upgrades are a cost effective solution for those drivers who want to spend weekdays on the road and weekends at the track. Each kit comes complete with 4-piston brembo monobloc calipers with sequentially sized pistons, high performance ferodo brake pads, 309 x 28 mm (12.2”) one piece cross drilled brembo rotor, goodridge stainless steel braided lines, billet aluminum mounting brackets, and factory spec hardware. Requires 17” or larger wheels. Calipers are available in red, black, or silver; please indicate your color choice when ordering. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$2,443.61
Make a selection 96437502301RATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$190.08
Make a selection 96433106080 Our spring plates are manufactured in europe by an OEM supplier to Porsche using the finest materials (high carbon steel, 7075 t6 aluminum and 65 shore rubber - oe spec). Sold individually. Right side fitment. 1 qty. Required.
$734.40
Make a selection 96434703200SP We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 032 00. This is ideally suited for use with our monoball inner tie rod, part # 96434705805sp for the 964 c2 / turbo look or 965 or part # 96434705804sp for the 964 c4 or rs. Please note: this is not for the wide body. Sold indiv...(choose a part on the right to read more)
$341.51
Make a selection 96473132040 Right outer; hd aluminum version w/chrome pin; lifetime warranty View/Change Diagram
From $19.19
Make a selection 96473131900 Driver side, heavy duty aluminum base instead of plastic, chrome pin, lifetime warranty. View/Change Diagram
$46.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |