Vehicles
Sections
408 not categorized PORSCHE 986 CHANGECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1974-77 (includes uncategorized and accessory items) FSPOR911RSRWHT30 Product details: General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
$3,288.60
Make a selection SB7X2 Integrated monoball 2 point strut brace - also designed to work in conjunction with rennline front monoballs, the 2-point strut brace is an excellent cost-saving alternative for owners who wish to maximize front trunk space. The 2-point brace requires no drilling to install, will not change your alignment settings, and is manufactured out of aircraft-quality aluminum with tig welded stainless steel brackets. The 2-point brace weighs 1.4 pounds. Silver in color. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$297.00
Make a selection N0201121 Steel lug nuts are the solution for the racers where wheel changes of different widths are necessary. the open head design allows the threads to tighten as far as one likes. this part is factory eauipment on all of the above captioned cars with standard wheels. For steel rim only. View/Change Diagram
From $1.89
Make a selection MB1230 The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$295.81
Make a selection P214 Jack receiver plate. Fits left or right side. General Fitment911 1984-86911 1978-83 930 1975-77 911 1974-77 912 1965-69 911 1970-73 911 1965-69
$52.92
Make a selection T01 Rennline's new powder-coated jack plate allows for the safe and easy lifting of either side of your vehicle in the factory designated input below each door. This is an excellent item to have if you change your car’s wheels frequently for track use, and dramatically improves the safety of lifting each side of your car compared to the factory supplied bilstein jack. General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 912 1965-69 914 1970-76 356 1960-65 356 1950-59
$41.04
Make a selection SB6090B One of the easiest and most cost-effective ways to improve your car's handling is the installation of a rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. Constructed of lightweight aircraft grade aluminum with stainless steel brackets. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. Black in color, silver shown. General Fitment911 1965-69912 1965-69 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
$210.60
Make a selection SB809192B Most other 3 point braces require you to drill and attach the third leg into the flimsy cross member behind the gas tank. Rennline has manufactured a bracket that utilizes the same mounting studs used to attach the master cylinder bracket . This mounting area is one of the strongest points on the front of your 911, giving you the optimum rigidity needed to eliminate camber change in hard cornering. Both the upper and lower bars are fully adjustable allowing you to set the desired amount of pre-stress. Constructed entirely out of aircraft grade aluminum. Fits all 911/912/930's from 1966-89. Black in color, silver shown. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$287.23
Make a selection STP243 This 8 mm extra long allen socket features a solid, one piece construction needed for busting loose rusted bolts of heat exchangers/exhaust systems. The extra long length easily accesses these hard to reach exhaust system bolts. 3/8" drive. Please call our office for availability. General Fitment911 1965-69914 1970-76 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$48.55
Make a selection PP34587 To correctly replace your heat exchanger, we recommend using new original-style nuts. Each nut is specifically designed for proper heat dissipation, expansion, and holding control. Sold as a complete set or per heat exchanger. Fits left or right heat exchanger. Sold as set. General Fitment911 1965-69911 1974-77 911 1970-73 911 1978-83 911 1984-86 911 1987-89
$35.22
Make a selection 997352107A1 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$1,435.10
Make a selection 99711013190 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$364.72
Make a selection 99663114380 Please note: this is for cup / r models up to 2001. They have the cut out for the clear headlight corner trim. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$594.00
Make a selection 94331600100ATK Send us your tired original torque converter and we will rebuild it to new specifications. Contact us today to find out the exchange details.
$1,931.69
Make a selection 93060291901A Replacing your distributor cap at regular intervals is highly recommended. The cap is susceptible to carbon deposits and can also develop hair line cracks due to heat and vibration. Those cracks allow moisture and debris in which hampers ignition and can erode terminals. We recommend closely examining both caps prior to ordering and replacing both if necessary. It is also a good idea to change the rotors at the same time, part # 93060290202 and the dust covers 93060290900. Sold individually.
$175.82
Make a selection 93060610500ATK The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, clean, degrease and rebuild to factory specifications. Remanufacturing is done in Germany, so the lead times can vary. Send us your original warmup regulator and we will have it remanufactured for you. We do not offer a core exchange on this part. Please note: please package your part as carefully as possible to ensure that damage is not caused en route to us.
$804.28
Make a selection 99663114480 Please note: this is for cup / r models up to 2001. They have the cut out for the clear headlight corner trim. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$580.93
Make a selection 93064130201GEB Remanufactured part sourced in Germany. Includes a new rubber sealing ring. Purchase a newly remanufactured unit from us and an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. Sold individually. 1 necessary per car. Please note: this is a special-order item. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis. Please call us in advance of placing your order, these are very hard to come by and in some instances, we c...(choose a part on the right to read more)
$2,175.23
Make a selection 99660301990 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,539.94
Make a selection 99919217350EQ A severely worn a/c belt will no longer be able to grip the pulleys and will start to slip and cause a loud squealing noise when the a/c is turned on. Belts undergo a lot of friction and wear. They are cost effective to change and will keep you're a/c functioning properly. Be sure to follow recommended service and replacement intervals set by Porsche on belts. High-quality OEM Bosch replacement belt, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$20.20
Make a selection 993624328012 The heater blower blows hot air from the exhaust heat exchangers into the interior via the vents. The blower housing is located atop the engine. This unit is a replacement motor and fan for the heater blower, does not include housing. Sold individually. 1 necessary per car.
$346.90
Make a selection 99610090391 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$873.18
Make a selection 96414718703EQ Remove the power steering belt cover to inspect your toothed steering belt for wear and cracking. Belts undergo a lot of friction and wear, so replacing them periodically will prevent damage. Be sure to follow recommended service and replacement intervals set by Porsche on belts or examine the power steering pump belt at each oil change. Sold individually. 1 necessary per car.
$73.66
Make a selection 99917015690 Bosch super plus premium core spark plugs are the longest lasting copper core spark plug on the market. They deliver quality performance based on technology found in the most sophisticated racing engines, and are proven on racetracks around the world. Benefits: superior reliability. Increased resistance to spark erosion (50% longer life vs. Oe plugs). Improved cold weather starts. Anti-seize and corrosion protection. Prevents misfires due to current leakage. Worn spark plugs can cause engine misfires and can reduce performance and fuel economy. Be sure to replace worn plugs during manufacturer recommended service intervals. If you have added aftermarket performance parts it is a good idea to change them more fr...(choose a part on the right to read more) View/Change Diagram
From $5.93
Make a selection 9A790727506 This tire pressure sensor is made by the original manufacturer to Porsche, huf. It is a good idea to change the valve stem out when changing the sensor. The valve stem is part # 993343018001 huf and major organizations including the tire industry association, recommend the tpms sensor and valve be replaced for: fitting new tires puncture repairs changing rims electronic failure damage during tire service damage by road hazards valve core or nut seizure did you know that the transportation recall enhancement, accountability and documentation) act in the u.s. Requires that 100% of all passenger cars, light trucks, and buses manufactured in the united states after september 2007 be equipped with a tire pressure mo...(choose a part on the right to read more)
From $109.44
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |