PORSCHE 944 TURBO LINE BRACKETCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1974-77 (includes uncategorized and accessory items)
19004320210 Experience the ultimate comfort of open-top driving with our authentic, high-quality wind deflector. It is designed to match the exact dimensions of the original for a perfect fit and optimal functionality. We have taken great care in adjusting both the height and width to ensure seamless integration with the 911 3.2 Carrera or 930 3.3 turbo models. The wind deflector operates in sync with the convertible top, opening and closing effortlessly for maximum user-friendliness. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$512.03
Make a selection SA03 These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required. General Fitment911 1965-69356 1960-65 912 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 944 1989-91 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 924 1980-85 924 1976-79 914 1970-76 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04 968 1992-95
$58.21
Make a selection SA01 These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required. General Fitment911 1965-69356 1960-65 912 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 944 1989-91 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 924 1980-85 924 1976-79 914 1970-76 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04 968 1992-95
$58.21
Make a selection SA02 These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required. General Fitment911 1965-69356 1960-65 912 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 944 1989-91 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 924 1980-85 924 1976-79 914 1970-76 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04 968 1992-95
$58.21
Make a selection 911050 Kit includes General Fitment911 1965-69911 1978-83 930 1975-77 911 1974-77 911 1970-73
$827.23
Make a selection 91120131100
From $64.10
Make a selection 914385 Brembo® GT brake systems were designed with one goal in mind, to maximize braking performance. These performance upgrades are a cost effective solution for those drivers who want to spend weekdays on the road and weekends at the track. Each kit comes complete with 4-piston brembo monobloc calipers with sequentially sized pistons, high performance ferodo brake pads, 323 x 28 mm (12.7“) one piece cross drilled brembo rotor, goodridge stainless steel braided lines, billet aluminum mounting brackets, and factory spec hardware. Requires 17” or larger wheels. Calipers are available in red, black, silver, or yellow; please indicate your color choice when ordering. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$2,482.92
Make a selection 99951108402 Known as: pipe clamp / pipe clamp rsgu 1100 20 x 25/15 / pipe clamp 1100 2 x 22/15 View/Change Diagram
From $10.02
Make a selection I11 Rennline blower motor cover brackets are a direct replacement for the factory steel units. Whether you want to save your factory blower motor cover assembly in its current condition, or you just don't have the factory pieces anymore, these are a great solution to mount your rennline aluminum blower motor cover. Manufactured from powdercoated aluminum and come in sets of two. General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 912 1965-69
$58.21
Make a selection ER1T911SBF Quality and attention to detail make these sway bars the choice for serious performance. These elephant racing lightweight bars are hollow. They are half the weight of competing bars of equal stiffness. Bearing blocks, drop links, and sway bar arms are cnc machined from aircraft-quality 6061-t6 aluminum for its high strength/weight ratio. Fully adjustable front and rear drop links eliminate suspension preload. Oversized, precision teflon-lined rod-ends provide long life, smooth operation, and high-reliability. Adjustable drop-link arm connection design provides infinitely adjustable sway bar stiffness rate and makes it easy to fine-tune your car's handling for various track conditions and driving s...(choose a part on the right to read more) General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 914 1970-76
$669.59
Make a selection FT24076 Our 911 sanden kits offer many benefits over the original york compressor found on the early 911 and 930 up through 1983. The sanden uses a "wobble-plate" to move five smaller pistons as compared to the york that uses a crankshaft to move two large pistons. The sanden wobble-plate design requires less horse power to turn and is a better match for the condenser area. Our sanden kit uses less engine compartment space and less horse power to turn. You will notice it runs smoother and quieter and improves system efficiency. The sanden compressor and it's mounting bracket bolt directly to the original york sub-plate. You can purchase our sanden kits in four configurations to match your objectives and budget: from...(choose a part on the right to read more) General Fitment911 1978-83930 1975-77 911 1974-77
$794.86
Make a selection 915454 Brembo® GT brake systems were designed with one goal in mind, to maximize braking performance. These performance upgrades are a cost effective solution for those drivers who want to spend weekdays on the road and weekends at the track. Each kit comes complete with 4-piston brembo monobloc calipers with sequentially sized pistons, high performance ferodo brake pads, 309 x 28 mm (12.2”) one piece cross drilled brembo rotor, goodridge stainless steel braided lines, billet aluminum mounting brackets, and factory spec hardware. Requires 17” or larger wheels. Calipers are available in red, black, or silver; please indicate your color choice when ordering. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$2,443.61
Make a selection SB6090 One of the easiest and most cost-effective ways to improve your car's handling is the installation of a rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. Constructed of lightweight aircraft grade aluminum with stainless steel brackets. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. Silver in color. General Fitment911 1965-69912 1965-69 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
$194.40
Make a selection SB6090B One of the easiest and most cost-effective ways to improve your car's handling is the installation of a rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. Constructed of lightweight aircraft grade aluminum with stainless steel brackets. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. Black in color, silver shown. General Fitment911 1965-69912 1965-69 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
$210.60
Make a selection SB7X2 Integrated monoball 2 point strut brace - also designed to work in conjunction with rennline front monoballs, the 2-point strut brace is an excellent cost-saving alternative for owners who wish to maximize front trunk space. The 2-point brace requires no drilling to install, will not change your alignment settings, and is manufactured out of aircraft-quality aluminum with tig welded stainless steel brackets. The 2-point brace weighs 1.4 pounds. Silver in color. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$297.00
Make a selection SB8091 This system mounts like no other brace on the market. The billet aluminum mounting brackets have been formed to perfectly fit the contour of your 911's strut towers, making installation a breeze. These truss style brackets have been engineered in a way that makes this brace not only one of the lightest, but one of the strongest braces on the market today. There is absolutely no alignment alterations or drilling required for installation. Fits all 911/912/930's from 1966-89. Silver in color. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$280.80
Make a selection SB809193 This system mounts like no other brace on the market. The dual bar design adds to the strength and resistance to deflection of the front suspension. The billet aluminum mounting brackets have been formed to perfectly fit the contour of your 911's strut towers, making installation a breeze. These truss style brackets have been engineered in a way that makes this brace not only one of the lightest, but one of the strongest braces on the market today. There is absolutely no alignment alterations or drilling required for installation. Fits all 911/912/930's from 1966-89. Silver in color. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$271.03
Make a selection SB809192B Most other 3 point braces require you to drill and attach the third leg into the flimsy cross member behind the gas tank. Rennline has manufactured a bracket that utilizes the same mounting studs used to attach the master cylinder bracket . This mounting area is one of the strongest points on the front of your 911, giving you the optimum rigidity needed to eliminate camber change in hard cornering. Both the upper and lower bars are fully adjustable allowing you to set the desired amount of pre-stress. Constructed entirely out of aircraft grade aluminum. Fits all 911/912/930's from 1966-89. Black in color, silver shown. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$287.23
Make a selection SIC10734800 Due to occasional oil seepage, the right side tensioner oil supply line has been modified, also, both left and right oil line are now installed with an additional bracket on the chain housing cover. This kit includes the updated right supply line, both brackets, clamps & screws. Fits all cars with oil fed tensioners. General Fitment930 1975-77911 1974-77 911 1970-73 911 1965-69 911 1978-83
$112.86
Make a selection SB809192 Most other 3 point braces require you to drill and attach the third leg into the flimsy cross member behind the gas tank. Rennline has manufactured a bracket that utilizes the same mounting studs used to attach the master cylinder bracket . This mounting area is one of the strongest points on the front of your 911, giving you the optimum rigidity needed to eliminate camber change in hard cornering. Both the upper and lower bars are fully adjustable allowing you to set the desired amount of pre-stress. Constructed entirely out of aircraft grade aluminum. Fits all 911/912/930's from 1966-89. Silver in color. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$287.23
Make a selection
© 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |