Vehicles
Sections
300 not categorized PORSCHE 924 S COOLINGCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1970-73 (includes uncategorized and accessory items) 96410601522 This fan is critical for engine cooling, be sure to inspect it periodically and replace it as necessary. Sold individually. 1 necessary per car.
From $1,133.35
Make a selection FVD10603500 Protect your engine and lower the operating water temperature by up to 60* f. Our kit contains everything you need to install this kit on a 3.4l 996. Don't be fooled by cheaper kits that claim they are complete, if the radiator is not supported correctly, road and track vibrations can destroy your investment. This fits Carrera c2 and c4 with manual transmission only ! This will not fit cars equipped with a tiptronic transmission.
$1,209.78
Make a selection 99610674006 All clearance sales are final; no returns allowed.
From $14.53
Make a selection FVD721KVB05 Bleed your cooling system the same way your Porsche dealer does! The simplest way to completely refill the cooling system in only one operation. No air-bubbles, no problems, quick and reliable. The compact compressed air-driven appliance generates a vacuum in the entire cooling-system.this also allows the system to be tested with the built-in pressure gauge for leakage. Coolant then can be introduced into the system via the quick disconnect hose and filled using the vaccum allready in the system, pulling the coolant in from the remote canister. This ensures the cooling-system immediately works reliably with no additional work bleeding required. It practically bleeds itself. The problem solver for all water cool...(choose a part on the right to read more)
$643.90
Make a selection 96410605131 This fan hub sits between the cooling fan and the alternator. It should be checked periodically for noise as it contains a bearing which can fail. Please note: 964 106 051 30 has been superseded by 964 106 051 31. If you are replacing 964 106 051 30, you will also need 3 qty., part # 90007609101 to install the new superseded hub. Sold individually. 1 necessary per car.
From $206.71
Make a selection N0127101
From $4.04
Make a selection 12837001R Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sportstop cross-drilled or drilled+slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water e...(choose a part on the right to read more) General Fitment911 1965-69911 1970-73 911 1974-77 911 1978-83 914 1970-76 924 1976-79 924 1986-88 924 1980-85 944 1982-85 944 1985-88
$192.28
Make a selection 12637001SR Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech slotted sport rotors. Stoptech slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance. General Fitment924 1980-85924 1986-88 944 1982-85 944 1985-88 911 1965-69 911 1970-73 911 1974-77 911 1978-83 914 1970-76 924 1976-79
$210.50
Make a selection 908259 Prevent brake dust from turning your wheels into a grimy mess. Just drop these aluminum alloy, turbo-vented disks into the back of each wheel and corrosive brake dust will collect on the kleen wheels disks and not on your wheel. Kleen wheels install easily and will not inhibit brake cooling or operation. General Fitment911 1978-83930 1975-77 911 1974-77 911 1970-73 944 1982-85 924 1980-85
$50.79
Make a selection 906310 Prevent brake dust from turning your wheels into a grimy mess. Just drop these aluminum alloy, turbo-vented disks into the back of each wheel and corrosive brake dust will collect on the kleen wheels disks and not on your wheel. Kleen wheels install easily and will not inhibit brake cooling or operation. General Fitment911 1978-83930 1975-77 911 1974-77 911 1970-73 944 1982-85 924 1980-85
$50.79
Make a selection FVD35103ABE The zimmermann sport brake disc combines high-quality cast materials, a vented and drilled braking surface and includes z-coating. This is a direct replacement for original number 477 405 083 d. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty drilled look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 2 rotors would be needed for the front axle. Left or right side fitment. General Fitment944 1982-85944 1985-88 924 1980-85 914 1970-76 911 1970-73
From $161.18
Make a selection 240911352GH Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. General Fitment912 1965-69911 1970-73 356 1960-65
$246.13
Make a selection FVD352131 The zimmermann sport brake disc combines high-quality cast materials, a vented and drilled braking surface and includes z-coating. This is a direct replacement for original number 911 352 041 08. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty drilled look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 2 rotors would be needed for the rear axle. Left or right-side fitment. Please note: we sell a complete kit utilizing these rotors with sport pads, our part # FVDbsk35291103s. The corresponding front rotor and p...(choose a part on the right to read more) General Fitment911 1970-73
From $177.48
Make a selection FVD505930001 Motorsport quality grp (glass-reinforced plastic) front bumper. - produced by a German motorsport manufacturer. - includes naca brake cooling ducts. - provisions for turn signals are included. - lightweight - made of high strength, grp (glass-reinforced plastic) please note: please provide us with the year / model. These are motorsport quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint. General Fitment911 1970-73
From $1,524.20
Make a selection 240911352BH Pagid blue rs42 are from the rs line of all around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and good cold friction. Rs42 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and are very stable over that wide temperature range. Rs42 pads offer excellent pedal feel and inspire confidence in extreme braking situations. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: vintage rally racing, formula racing and touring cars. Features at a glance: medium friction coefficient medium initial bite goo...(choose a part on the right to read more) General Fitment912 1965-69911 1970-73 356 1960-65
From $208.35
Make a selection FVD351917RSR These finned 917 calipers are high quality German reproductions that use the original 43 mm pistons in the front and 38 mm in the rear. They are manufactured in high strength aluminum to aerospace standards. Features: motorsport-quality high strength aluminum with cooling fins to significantly reduce heat. Fabricated to aerospace standards. Reproduced to exacting specifications using the original caliper. Tested on europe's most grueling tracks. Complete with high quality hardware included front pistons - 43 mm rear pistons - 38 mm black anodized for corrosion resistance and factory like appearance. Lightweight - caliber has 5,5lbs (2,5 kg) please note: matching brake discs should be 300 mm + - 3 mm for the fr...(choose a part on the right to read more) General Fitment911 1970-73
From $10,685.44
Make a selection 240911351GV Pagid yellow rsl29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a g...(choose a part on the right to read more) General Fitment911 1970-73
From $258.72
Make a selection 24091135201BH Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Yellow: the suc...(choose a part on the right to read more)
$323.14
Make a selection 240911351OV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. General Fitment911 1970-73
$206.06
Make a selection FVD50599106MM The moshammer front bumper upper air vent is a combination of aggressive styling, aero-efficiency and increased cooling capacity. It is a motorsport finishing touch that complements the entire evo rs (991.2 turbo/s) / stormforce (991.1) / stormforce evo rs (991.2) or downforce rs (991.1 turbo/s) aero packages. FVD Brombacherhas a tradition of offering exclusive body styling that is functional, easily installed, wind tunnel tested, German made and TUV approved. Those high standards naturally led us to the moshammer brand. The moshammer aero styling brand has become a leader in the premium automotive segment. Each part is precision designed and manufactured in Germany for perfect fitment, superior durability and...(choose a part on the right to read more)
$401.54
Make a selection 240911351BV Pagid blue rs42 are from the rs line of all around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and good cold friction. Rs42 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and are very stable over that wide temperature range. Rs42 pads offer excellent pedal feel and inspire confidence in extreme braking situations. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: vintage rally racing, formula racing and touring cars. Features at a glance: medium friction coefficient medium initial bite goo...(choose a part on the right to read more) General Fitment911 1970-73
From $214.08
Make a selection FVD20799601 Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)
$306.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |