Vehicles
Sections
256 not categorized PORSCHE 356 C A CONTROL ARMCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1965-69 (includes uncategorized and accessory items) FVD33150005 Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm cannot compensate enough when lowering your Porsche, leaving you with as much as ½ inch of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold in pairs. 1 necessary per car.
$825.66
Make a selection FVD34101702RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$652.21
Make a selection FVD34101702ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$509.65
Make a selection FVD33150045 Original rubber replacement bushing (65 shore hardness value) for the rear control arms (camber link and caster link). This bushing cartridge is weather sealed and is crafted in high carbon steel and 7075 t6 aircraft aluminum. Sold individually.
$70.09
Make a selection FVD34101802RAT We will send you a reconditioned control arm, kindly send back your old part, or core . The reconditioned control arm has been full inspected, disassembled, degreased and we have properly installed FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner please note: each control arm is remanufactured in Germany, so the lead times can vary. This part is sold on an exchange basis, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and re...(choose a part on the right to read more)
$652.21
Make a selection FVD34101802ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$509.65
Make a selection FVD34102702ATK By ordering this part number you get after previous sending in your wishbone overhauled with new race-silent blocs back. The race-silent blocs (85 shore) give you more stable driving. Should it not be repairable, we will inform you immediately.
$301.75
Make a selection FVD34391192SET Replace worn-out original front lower control arm bushings with our FVD sport bushings, made of rubber with an 85 shore hardness value that is the same as the rs models. 85 shore is more durable, provides more positive suspension location and is still quiet and comfortable for street use. Features: better handling reduces that sloppy steering feel makes precision adjustments of the suspension easier does not produce any noise like the teflon bushings. Rubber has a shore hardness value of 85 (like rs models) fit's like oem, simple installation made in Germany set is sold per axle. 2 necessary per car.
$171.07
Make a selection FVD34102700ATK By ordering this part number you get after previous sending in your wishbone overhauled with new race-silent blocs back. The race-silent blocs (85 shore) give you more stable driving. Should it not be repairable, we will inform you immediately.
$301.75
Make a selection FVD341999R Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with our FVD clubsport series. They are made from rubber with a 85 shore hardness value which is the same as the rennsport models. 85 shore is more durable, provides more positive suspension location and is quiet and more forgiving than a monoball upgrade. This is the ideal upgrade for street and light track / clubsport use. This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes 85 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.
$134.24
Make a selection FVD34391101SET Replace worn-out original front lower control arm bushings to return your car to its intended suspension geometry and steering feedback. Features: better handling reduces that sloppy steering feel does not produce any noise like the teflon bushings. Rubber has the original shore hardness value of 65 (like oem) fit's like oem, simple installation made in Germany if you are looking for a sportier upgrade we suggest our sport lower control arm set, part # FVD34391192set. Set is sold per axle. 2 necessary per car.
$165.13
Make a selection
$341.14
Make a selection
$3,355.70
Make a selection 901602702X
$685.72
Make a selection BRAID159RSR New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$972.00
Make a selection BRAID1611RSR New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$1,219.32
Make a selection BRAID1610RSR New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$1,404.00
Make a selection BRAID1610 New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$1,009.80
Make a selection BES99100060S Without valve control
$4,110.87
Make a selection BRAID156RSR New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1987-89 911 1984-86
$1,225.80
Make a selection BRAID159CUP New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$837.00
Make a selection 115900991BI01 This bilstein b16 damptronic active coil over suspension kit features ride height and damping adjustability that is compatible with the Porsche pasm electronic damping system. The damptronic system constantly monitors the road surface via sensors, so the vehicle adjusts for perfect traction, unparalleled control and stable handling. Each active Porsche electronic suspension feature, control and setting is retained and all function in the same manner. The front and rear progressive rate springs are matched with bilstein's famous monotube performance dampers. This suspension is custom tuned for the 991.1 and 991.2 variants. The front and rear threaded damper bodies allow .8 - 1.5 inches (20-40 mm) of travel whic...(choose a part on the right to read more)
$5,198.69
Make a selection BRAID1512 New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1985-88 944 1982-85 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$1,090.80
Make a selection BRAID1511 New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69914 1970-76 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$1,020.60
Make a selection BES99125020SK No need for Porsche sport exhaust (pse) envy with this muffler! This offers weight savings and a far more exotic sound than the pse, all without drone. It is the perfect compromise for you and your loved ones. Rich, deep, turbo motorsport tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english and is the best choice for a daily driver. Features: - + 16 crank hp & + 15 crank torque. - weighs 37 lbs. (17 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - direct bolt on replacement for the factory center muffler. - includes necessary installation hardware. - reduces turbo lag, backpressure and thermal lo...(choose a part on the right to read more)
$5,275.91
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |