![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
PORSCHE BOXSTER OLDS PARTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 356 1960-65 - Fuel/Exhaust (includes uncategorized and accessory items) ![]() 115900964BI01 Bilstein b16 (pss10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers. Simply adjust compression and rebound settings, from comfort to competition, by rotating the setting number knob at the base of the shock. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Ride height is adjustable from 1.0 to -1.5 20-40mm (front) & -1.0 to -1.5 20-40mm (rear - minimum 1 lowering). Bilstein b16 (pss10) suspension allows you to enjoy the kind of precise suspension tuning formerly available only on race cars. We recommend purchasing our lowering collar kit if you plan to run the...(choose a part on the right to read more)
$4,048.28
Make a selection 115385 If you are looking for added damping performance on the street, the bilstein b6 performance damper is the ideal solution. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually. 1 necessary per car. We recommend adding our lowering spring collars if you would like a lower ride height, our part # 115110016
$672.21
Make a selection 90134722303R The original rubber bushing is proven to be a weak link that can fail prematurely, allowing chassis geometry to be compromised. Symptoms include suspension movement during acceleration, braking and cornering. The powerflex black series bushing is manufactured of a more dense rubber than the original. It is a 95 shore compound that is more resistant to load than standard rubber which provides better control of chassis geometry for track use. Features: designed for track use improved track handling more precise and accurate alignment constant steering geometry increased tire life better steering feedback longer service life of suspension components less nvh (noise vibration hardness) than polyurethane bushings pl...(choose a part on the right to read more)
$39.27
Make a selection 91133305117 High-quality boge OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car.
From $196.35
Make a selection 91120127200EQ We suggest periodically checking your gas cap seal for fine cracks which produce fumes. If you replace the cap and the fumes persist, check the fuel filler neck, fuel lines, expansion tank and vent shut off valves. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
$15.02
Make a selection 91110090705EQ High-quality victor reinz replacement gasket set, designed to perform like the original. Victor reinz gaskets are extremely adaptable and flexible, yet also possesses great mechanical strength. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$93.56
Make a selection 91134101310ATK The reconditioning process includes full inspection of the cross member to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we seal it with a corrosion resistant plating. Send us your cross member and we will have it reconditioned for you. We do not offer a core exchange on this part. If your original part is defective and cannot be salvaged, we will notify you and make arrangements for its return. Sold individually. 1 necessary per car.
$235.62
Make a selection 91100650100 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $25.41
Make a selection 90142470106 High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $30.03
Make a selection 91120702703 This oil cooler / radiator coil supply hose tends to wear, crack, deform and can even collapse with age, vibration and poor oil quality. This hose is the latest supersession, part # 911 207 027 05. It is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: the corresponding return line is part # 91120702904. We recommend replacing that at the same time to save on labor.
$117.81
Make a selection 91120127901 This protective cap prevents a fuel stations fuel nozzle from harming the paint on the fender. They tend to fade, discolor and crack with time and are a perfect touch for a restoration or fuel tank / system overhaul. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. View/Change Diagram
From $13.13
Make a selection 93000651000 Decals are commonly overlooked when completing a restoration or refreshing the paint. They are often a key detail that sets a car apart when being judged at an event or being purchased by a keen aficionado. Replace yours with this quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $18.43
Make a selection 91150301605KEV Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar headlight bucket. Features: - produced by an OEM manufacturer. - lightweight .6 lbs. (.3 kg) - made of high strength kevlar. - metal mounting ring is cast inside the bucket for mounting. Sold individually. 1 necessary per car. Please note: requires drilling for wiring, etc. This is a high-quality part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world.
$813.12
Make a selection 91150104002 This is the pillar that buts up to the a-pillar to secure the hinges. It is prime coated and includes the angular bracket. This hinge pillar is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$621.50
Make a selection 91142470102EQ High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. For a complete installation, we recommend replacing the heater control cable guide tube, part # 90142470401eq and grommet, part # 91450431900 sold individually. 1 necessary per car. Please note: for models with automatic heat control (m424 option)
$16.97
Make a selection 91135295005EQ If your brake pads are at the end of their service life you will experience vibration, squealing, a pulsating brake pedal or poor response under heavy braking. We recommend replacing them as soon as any of the above signs are noticed. Also, be sure to inspect the rotors when changing the pads. For convenience, we sell complete rotor and pad kits, simply check under brake service kits. This pad set contains textar OEM (original equipment manufacturer) parts that we source in Germany to ensure quality, reliability and precise fitment. Textar brake pads are precision engineered to offer maximum safety, performance and comfort. This uncompromising approach has been the very ethos of textar for more than 100 years. ...(choose a part on the right to read more)
$77.39
Make a selection 91150301603EQ Headlight buckets are infamous for rusting out as often drain plugs are clogged and trap the water. Replace yours with this dansk made product. Dansk offers a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$184.80
Make a selection 91163120603SCHR Fog lights are prone to stone chips and cracks. Inspect and replace them before they allow moisture in. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car.
$314.16
Make a selection 91150301502EQ Headlight buckets are infamous for rusting out as often drain plugs are clogged and trap the water. Replace yours with this dansk made product. Dansk offers a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$175.56
Make a selection 91150301505KEV Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar headlight bucket. Features: - produced by an OEM manufacturer. - lightweight .6 lbs. (.3 kg) - made of high strength kevlar. - metal mounting ring is cast inside the bucket for mounting. Sold individually. 1 necessary per car. Please note: requires drilling for wiring, etc. This is a high-quality part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world.
$813.12
Make a selection 91150104000 This is the pillar that buts up to the a-pillar to secure the hinges. It is prime coated and includes the angular bracket. High-quality replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: these newly reproduced pillars are made of spcc steel and include an m8 stamp. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$703.40
Make a selection 91154522500EQ High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: this contains the trim frame slot for chrome / black trim.
$166.32
Make a selection 911561023003EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 003 av made in Germany. Sold individually. 1 necessary per car. Please note: if you own a 1986-89 model please see our part # 911561023602eq
$917.07
Make a selection 91151101003ALU Quality replacement part for original number, 911 511 010 03 grv. This is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$2,254.56
Make a selection 91150514704EQ This impact strip suffers from uv rays and wax residue, it detracts from your cars appearance and should be changed when servicing the front bumper. Be sure to add a clamping plate for proper installation, part # 91150514902 any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$173.25
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |